GWS online shop › MIG / MAG welding machines
APS Welding Lumina 600 CC/CV (DIGICON)
Available to order – ask for delivery time

The Lumina 600 CC/CV is a 600 A digital CC/CV power source for heavy fabrication lines, offering repeatable digital settings for MIG/MAG, flux-cored and MMA welding.
- Adjustable inductance lets welders fine-tune arc character — smooth, fluid bead or aggressive penetration — matched to the job requirement.
- Under/Over voltage, Phase loss, IGBT overcurrent, short-circuit, and internal overtemperature shutoff — all built in as standard.
- Crater current and voltage adjust from the MIG torch. Prevents crater cracks at weld end — critical for structural and pressure-vessel applications.
Supplied, installed and serviced in the UAE and GCC by Grand Welding Solutions.
Specifications
| Input Voltage | 415 VAC, 3-Phase, 50/60Hz |
| Input Voltage Range | 330 VAC to 500 VAC |
| Primary Switching Device | IGBT MODULE |
| Input KVA @ 400A | 16.8 KVA |
| Input Cable | 4 core 6 mm² with open leads, 4 metres |
| Output Current Range | 10 Amp to 600 Amps |
| Output Current @ 60% Duty Cycle | 600 Amps |
| Output Current @ 100% Duty Cycle | 465 Amps |
| Max Open Circuit Voltage | 85 VDC |
| Ingress Protection Class | IP21 |
| Insulation Class | Class H |
| Cooling Type | Forced Air (Fan-cooled) |
| Inverter Frequency | 20 kHz Full-Bridge |
| Dimensions (L × W × H) | 625 mm × 370 mm × 690 mm |
| Net Weight | 57 kg |
| Base / Footing | Rubber Foot |
| Lifting Support | Ergonomic Handle |
| Material Category | Supported Materials |
Add to your enquiry in the online shop · Request a quote · WhatsApp +971 58 521 1966