GWS online shop › Plasma cutting machines
APS Welding Rhino Cut 160
Available to order – ask for delivery time


The Rhino Cut 160 is a 160 A industrial air plasma cutter for thicker plate and longer cutting jobs, manual or on a CNC table.
- Protected against vertical water drops and dust — suitable for heavy workshops, fabrication yards, and industrial floor environments.
- Pre-cutting air flow verification ensures optimal cutting conditions before starting — reduces errors and improves cut consistency.
- Under voltage, over voltage, phase loss, over temperature, IGBT over-current, and short circuit protection — all built-in for worry-free operation.
- Full 160 Amps at 60% duty — handles cuts up to 40mm coarse and 57mm severance on production loads.
- Inbuilt protection against voltage fluctuations, phase loss, over-temperature, and short circuit — safe in demanding environments.
Supplied, installed and serviced in the UAE and GCC by Grand Welding Solutions.
Specifications
| Input Voltage | 415 VAC, 3-Phase, 50/60 Hz |
| Voltage Range | 330 VAC – 500 VAC |
| Input KVA @ 160A | As per specification sheet |
| Input Cable | 4-core 4 mm², open leads, 4 metres |
| Primary Switching Device | IGBT Module |
| Controller | Microprocessor Controlled |
| Output Current Range | 30A – 160A |
| Output @ 60% Duty Cycle | 160 Amps |
| Output @ 100% Duty Cycle | 124 Amps |
| Max Open Circuit Voltage (OCV) | 380 VDC |
| Cutting Process | Air Plasma Cutting |
| Clean Cut Thickness | Up to 32 mm |
| Coarse Cut Thickness | Up to 40 mm |
| Severance Thickness | Up to 57 mm |
| Ingress Protection | IP21 |
| Insulation Class | Class H (180°C) |
| Cooling Method | Forced Air (Fan Cooled) |
| Thermal Protection | Auto Thermal Cutout |
Add to your enquiry in the online shop · Request a quote · WhatsApp +971 58 521 1966